This auction is live!

You need to be registered and approved to bid at this auction.

This auction is closed!

It is no longer possible to bid at this auction.

You are registered for this auction

You are now approved to bid at this auction.

Your auction registration is now pending

You have successfully registered for this auction, pending approval to bid. Please check your email for further information.

Your auction registration has been declined

Please contact the auctioneer for more information.

Kraft Heinz (75) S/S Pumps, (35) S/S Processors, (15) S/S Mixers; (350) Lots
Live
Venue address
2800 Palmer Street
Pittsburgh, PA
15218
United States
Kraft Heinz (75) S/S Pumps, (35) S/S Processors, (15) S/S Mixers; (350) Lots

Auction dates
18 Oct 2016 10:00 ET
Auction currency
USD
There are 348 lots within this auction
Primary Category
Category
Country
State/Province
Town/City
Sorted by
We have chosen not to publish our results. Please contact us directly for any enquiries.
S/S Agitator with 5.5 HP Motor, 3470 RPM
Eastern Agitator, M/N E-2V, S/N 8558, with 3-Prop Design, Vice Type Vessel Mount
Tank Agitators, 1-Lightnin Mixco Batch Mixer, 1-Mix More, 2-Lightnins
Estimate
Tank Agitators, 1-Mix More with Baldor Motor, 1-Eastern with Reliance Motor
Estimate
Copper Heat Exchanger Tube Bundle, Aprox. 50" L x 14" Dia.
Alpha Laval Shell and Tube Heat Exchanger, M/N 6x3, S/N HC5969SCN, 300 PSI @ 300 Degrees F, 250
Estimate
Contherm Corp. Heat Exchanger Tubes, Tested at 450 PSIG, Aprox. 72"L x 11" Dia.
Estimate
316L Heat Exchanger Tube Bundle, Aprox. 57" L x 8" Dia.
S/S Shell and Tube Heat Exchanger, 1 1/2" Clamp Type, Aprox. 39" L x 10" Dia.
Teledyne Readco 4" Extruder Covers, 150 PSI and 450 Degrees F, S/N 5631987
Estimate
Fisher Actuator Valve, Size: 1 1/2", S/N 12180814, Rating CL250B
Estimate
FMC Vibratory Conveyor with S/S Hopper, M/N DAF 2000, S/N 1649, Mounted on S/S Skid
Vibratory Feeder with Hopper, Mounted on S/S Frame, Hopper 14" Dia.
Estimate
Omega Vibratory Disc Feeder, M/N 23-02, S/N OD-2779
Estimate
Vibracraft Vibratory Spiral, S/N 1997, Mounted on Frame
S/S Shaker Deck , Aprox. 67"L x 19"W x 4" D, Mounted on S/S Frame
S/S Power Feed Hopper, with Additional Hopper, and Roller Hopper, Feed Hopper Dims.: 33"L x 18"W x
Estimate
Nutripure Ultravoilet Sanitary Conditions, Part #: SC-24, Replacement Lamp #: S24T6, Aprox. 48"L x
Estimate
3 HP Vacuum Pump, Type FN100L, 220V
Hydrovana 1 HP Vacuum Pump, 220V
Estimate
Parker Hannifin Zenith 1/2 HP Pump, M/N 61844743-001, S/N 6184743, 8/18RPM
Estimate
Tri-Flo 1/2 HP Centrifugal Pump, M/N SP114MD-S, S/N X0747, with 1725 RPM
IKA Dispak-Reactor, Model DR3-6A, S/N 00666 with Reliance 7.5 hp Drive Only, 3520 RPM, 230/460 V,
Estimate
Unimont 20 HP Centrifugal Pump, M/N 2.5C, S/N 082103, 250 GPM, 230/460 V, 3525 RPM
Worthington 5 HP Pump, M/N D5801 with Siemens 3455 RPM Motor, Mounted on Skid
Gear Drives, 1-10HP/1740RPM and 1-5 HP/1680RPM
Motors and Drives, Ranging from 1 HP-7.5 HP, 1-with Starter
Rietschle Aprox. 3 HP Vacuum Pump, Type: KF 101 [01], 1700 RPM
Electrostat 20 HP Motor,M//n 3660F620000, 240 V, 1150 RPM
Estimate
Mount Type Centrifugal Pump, Mounted on Skid
SEW 20 HP Gear Drive, 1760 RPM
Estimate
Skid Mounted Centrifugal Pump, S/N WM103299, Square D Starter with SEW Drive
Estimate
Ametek 2.8/5HP Blower System with Air Filtration, 2850/3450 RPM
Adhesive Tape Sealing Machine, M/N CS88, 110 V, 50 Hz, 2 x 90W, Mounted on Portable Frame, Top/
Estimate
Modern Process Equipment Mill, with S/S Hopper, Mounted on Steel Frame
(2) Hassia Parts Consisting of Unwind Stand and Film Hydrogen Peroxide Treat System with Film
Estimate
FPEC Aprox. 72" L x 33" W S/S Platform Lift, S/N 1975
Estimate
Capway Systems Dough Cutter System, Job #1953 with Aprox. 6" Wide Belt and Control Panel with (2)
Estimate
Loma Metal Detector, Model IQ2, S/N 37S832, Mounted on S/S Stand (Located in Utah)
Estimate
Loma Metal Detector, Model IQ2, S/N 37S833H, Mounted on S/S Stand (Located in Utah)
Estimate
Mettler Toledo Safeline Metal Detector, S/N 45745 (Located in Utah)
Estimate